Installing The Applications; Testing The Installation - Creative Structures Sound Blaster 16 Getting Started

Installing the Applications

Your audio card's applications can be installed from floppy diskettes,
a CD-ROM, or both, depending on which is supplied in your package.
To install from CD-ROM
1. Make sure that your CD-ROM drive is installed and working
properly. For details, refer to the documentation that comes
with it.
2. Insert the installation CD-ROM into your CD-ROM drive.
The CD-ROM supports Windows 95 AutoPlay mode and starts
running automatically. If it does not, see Appendix C,
"Troubleshooting".
3. Follow the instructions on the screen to complete the
installation.
To install from diskettes
1. Insert the first installation diskette into your floppy disk drive.
2. Click the Start button, and then click Run.
3. In the Run dialog box, type A:\SETUP or B:\SETUP.
4. Click the OK button and follow the instructions on the screen
to complete the installation.

Testing the Installation

After the applications are installed, you can use Windows 95 Media
Player to test if your audio card is working properly. If you do not have
Media Player, follow the instructions below to install it.
To install Media Player
1. Click the Start button, point to Settings, and then click
Control Panel.
2. In the Control Panel window, double-click the Add/Remove
Programs icon.
2-4 Installing Software in Windows 95
This manual downloaded from http://www.manualowl.com