Creative Structures Sound Blaster 16 Getting Started page 58

f. Click the Settings button in the Proxy Server box and in the Server
g. Click OK.
To Set Up a Dial-Up Script
To set up a dial-up script:
1. If you have not installed the Dial-Up Scripting Tool, follow the
steps below to install the tool:
a. Insert the Windows 95 CD-ROM into your CD-ROM drive.
b. Using the Control Panel, select Add/Remove Programs.
c. Select Windows Setup from the Title Bar.
d. Select Have Disk, Browse and locate the RNAPLUS.INF file in
e. Click OK and follow the instructions on screen to complete the
2. You will need a dial-up script (filename.SCP) in the directory
\Program Files\Accessories\ of your system. This is usually
provided by your Internet Service Provider.
If you do not have a dial-up script, check with your Internet
Service Provider whether you need one and where can you
download one to your system.
3. Once the Dial-Up Scripting Tool is installed:
a. Click Start on the taskbar.
b. Select Programs, followed by Accessories to run the Dial-Up
c. In the Connections section, select the name of your Internet
d. Click Browse and double-click on the script file name you created
e. Click Apply and click Close.
4
This manual downloaded from http://www.manualowl.com
box type the Proxy server address followed by the port number.
E.g., If your Service Provider's proxy server is proxy.myisp.com
and the port number is 8080, then the entry should be
"proxy.myisp.com:8080".
Ignore this section if your Service Provider does not require
a dial-up script. If using Dial-Up Scripting, do not check the
"Bring Up Terminal Window" option.
\ADMIN\APPTOOLS\DSCRIPT\.
installation.
Scripting Tool.
Service Provider.
in step 2.