Main Menu - Honeywell XNX-AM Series Technical Manual

XNX Universal Transmitter
Figure 19. General Status Screen with unit information
Introduction

Main Menu

Once the proper passcode has been entered, the transmitter
displays the Main Menu.
From the Main Menu, a Level 1 user can:
• display the current settings/configuration
• test the transmitter
• calibrate and bump test the transmitter
• configure the unit for language, date and time
The Main Menu consists of these options:
Menu
Provides access to settings to configure the
Configure
transmitter and connected devices
Provides access to tools and settings to allow
Test
simulation of gas events to test the system
Displays current settings for the transmitter
?
Information
including optional relays and Modbus
Gas Displays the interface to calibrate sensors
Calibration attached directly to the transmitter
24
Figure 20. The Main Menu
Description
See
Section...
Configuring
the
Transmitter
Test Menu
Information
Menu
Gas
Calibration
Menu