Devcomm Pc-Based Hart Interface - Honeywell XNX-AM Series Technical Manual

XNX Universal Transmitter

DevComm PC-based HART Interface

The XNX-HART interface facilitates remote access to all features
of the local user interface including displaying status, testing,
calibrating, and configuring. A device descriptor (DD) file is
available to adapt standard tools for use with the transmitter.
WARNING
!
After changing parameters with a handheld device, verify that the
Warning:
parameter settings are correct at the transmitter.
The following screens show some of the features of these two
interfaces for the transmitter.
Figure 237. Presentation of XNX data by DevComm2000
HART Protocol
Figure 238. XNX data displayed on an Emerson field communicator
Security level 1 is required to select the display language and to
adjust the date and time. All other configuration options require
security level 2 access.
185