Table of Contents
Advertisement
Advanced operation
5.1 OSD picture menu
Overview
•
Profile
•
Brightness
•
Contrast
•
Saturation
•
Color temperature
•
Gamma
•
Sharpness
5.1.1 Profile
About profiles
To select a profile means to load a set of predefined video parameters like Brightness, Contrast, Saturation,
Input selection (Primary & Secondary), Multi-image layout selection, etc.
The user can modify the default video parameters associated to each profile and save the new parameters
setting under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be temporarily modified,
but the factory default can't be overwritten and can always be recalled through the recall profile menu item.
The available profiles for your display are:
•
Factory
•
X Ray
•
User 1
•
User 2
•
User 3
To select a profile
1.
Bring up the OSD main menu.
2.
Navigate to the Picture menu.
3.
Enter the Profile submenu.
4.
Select one of the available profiles and confirm.
5.1.2 Brightness
To adjust the brightness level
1.
Bring up the OSD main menu.
2.
Navigate to the Picture menu.
3.
Enter the Brightness submenu.
The command bar Brightness is highlighted.
4.
Set the brightness level as desired and confirm.
The brightness level can also be adjusted through a shortkey function.
Brightness level is adjusted by controlling the backlight illumination only.
34
K5903030 (451920611336) /05
MDSC-2242
Advertisement
Table of Contents
