Technical Data - Graco SaniForce 2150 Operation Manual

Technical Data

Technical Data Data
Technical Technical Data
SaniForce SaniForce Electric SaniForce Electric Electric Double Double Double Diaphragm
Maximum fluid working pressure
2150
3000HS, 4000HS
Air pressure operating range
2150
3000HS, 4000HS
Air inlet size
Maximum suction lift (reduced if checks don't seat well due to damage, blockage, or extreme speed of cycling)
2150 (@ 20 Hz)
3000HS, 4000HS
Maximum size pumpable solids
2150, 2 in. balls
3000HS, 3 in. flapper
4000HS, 4 in. flapper
Minimum ambient air temperature for operation and
storage.
NOTE: NOTE: NOTE: Exposure to extreme low temperatures may result
in damage to plastic parts.
Fluid displacement per cycle (free-flow)
2150
3000HS, 4000HS
Maximum free-flow delivery (continuous duty)
2150
3000HS, 4000HS
Maximum pump speed (continuous duty)
Fluid Inlet Inlet and and Outlet Outlet Size Size
Fluid Fluid Inlet and Outlet Size
2150T, Stainless Steel
2150HS, 3A, PH
3000HS, Stainless Steel
4000HS, Stainless Steel
Electric Electric Electric Motor Motor Motor
AC, Standard CE (04A, 05A,
Power
Number of Motor Poles
Speed
Constant Torque
Gear Ratio
Voltage
34
Diaphragm Pump Diaphragm Pump Pump
06A)
US US US
100 psi
60 psi
20 to 100 psi
20 to 60 psi
3/8 in. npt(f)
Wet: 30 ft
Dry: 14 ft
Wet: 30 ft
Dry: 8.4 ft
1/4 in.
2.6 in.
3.8 in
32° F
0.6 gallons
0.4 gallons
100 gpm
60 gpm
60 Hz/160 cpm
2.5 in sanitary connection or 65 mm DIN 11851
2 in. sanitary connection
3 in. sanitary connection
4 in. sanitary connection
7.5 HP
4–Pole
1800 rpm (60 Hz) or 1500 rpm (50 Hz)
6:1
11.25
3–phase 230V / 3–Phase 460V
Metric Metric Metric
0.69 MPa, 6.9 bar
0.41 MPa, 4.1 bar
0.14 to 0.69 MPa, 1.4
to 6.9 bar
0.14 to 0.41 MPa, 1.4
to 4.1 bar
Wet: 9.1 m
Dry: 4.3 m
Wet: 9.1 m
Dry: 2.5 m
6.3 mm
66.0 mm
96.5 mm
0° C
2.3 liters
1.5 liters
378 lpm
227 lpm
5.5 kW
3A5133J