Connection Of Pc To Intellix™ Bmt 330 - GE Intellix BMT 330 User Manual

Connection of PC to Intellix™ BMT 330
The first configuration must be carried out by a direct connection of BMT Setup
Software to the Intellix™ BMT 330.
To connect a laptop with the BMT Setup Software directly to the Intellix™ BMT 330
use the provided USB to mini-USB cable to connect your laptop to the mini-USB
connector on the Intellix™ BMT 330 motherboard.
Power supply
AC protection shield
Mains input
Relay
connectors
CANBUS and RS-485
WARNING
 Prior to accessing the Intellix™ BMT 330 cabinet, de-energise any AC
supplies to the Intellix™ BMT 330 Alarm Relay PCB, and apply LOTO
procedures.
 Open the Intellix™ BMT 330 cabinet. Ground the coaxial inputs by
operating the bank of grounding bars available at the DIN rail connectors.
 The mini USB socket on the motherboard has an extension cable that is
led to the bottom right hand corner of the cabinet (see Figure 3). Connect
your laptop to this USB extension cable.
Page 14
Intellix
Intellix™ BMT 330 Cabinet Internal Layout
Figure 3
The Intellix™ BMT 330 is required to be live during the
set up process. Ensure that the following steps are
followed precisely to avoid the risk of electric shock.
BMT330UM v1.0
BMT 330 User Manual
™
20-Jun-16
System PCBs
Optional comms.
module
USB cable
Bushing &
Neutral CT inputs
Grounding bars