Utilities; Modbus Slave Settings - GE Intellix BMT 330 User Manual

Intellix BMT 330 User Manual
™

Utilities

Modbus Slave Settings

The standard parameters for Port0 (optional Ethernet/Fibre Optic) and Port1 (RS-
485/USB) are:
 Device Address: the device ID (default 3).
 Baud Rate: The communication's bit rate.
 Protocol: Either binary (RTU) or text (ASCII).
 Parity: extra bit used for error checking (EVEN, ODD, NONE).
The parameters above can take any value, as long as they match the ones in the
Communication page. Also, if there are other layers between the PC application
and Intellix™ BMT 330, these layers must be able to handle the port settings, and
then the matching must be:
 The Communication Settings must match the PC interface layer and
 The Intellix™ BMT 330 interface layer must match the Modbus Slave
Settings.
Figure 24: Utilities > Modbus Slave Settings tab
BMT330UM v1.0 20-Jun-16
Page 55