System Supervision - GE Intellix BMT 330 User Manual

Intellix BMT 330 User Manual
™

System Supervision

Parameter
High Comm CPU temperature
(sets the alarm trigger value)
High FPGA temperature
(sets the alarm trigger value)
Field devices comm error
Inter CPU comm error
Neutral CT failure timeout
Figure 13: Alarm > System Supervision tab
Suggested Value or Source of Data
Default= 75 deg C; (usual operating range -40 to
70 deg C)
Default= 75 deg C; (usual operating range -40 to
70 deg C)
Number of continuous failed comms attempts
before triggering alarm. Default=50
Number of continuous failed comms attempts
before attempting to recover the inter CPU
communication. If unsuccessful the alarm will be
triggered. Default=100
Period with PD activity on any phase (A, B or C)
but none on the neutral required to trigger
alarm. Default=48 hours
BMT330UM v1.0 20-Jun-16
Page 31