Setting The Priority; Setting [Key Link] - Panasonic Live Production Suite Series Operating Manual

2
Adjust the color.
f Set the [Hue], [Sat], [Lum], or [Color Palette] in [Border Color] in the R menu.
Setting the trimming
Set the trimming type and values as well as operation for when manual is set. The default setting is as shown in the following figure.
1
Select the <ME1>/<ME2> button → [PinP1], [PinP2] → [Resizer] tab.
2
Select an item in [Preset] in the [Trim(Square)] column.
[Trim]
[Pair]
[Manual]
3
Set the [Left], [Top], [Right], or [Bottom] in [Trim] in the R menu.
f Set the trimming value. The [Left] setting cannot exceed the [Right] setting (and vice versa), and the [Top] setting cannot exceed the [Bottom]
setting (and vice versa).
[Left]
[Top]
[Right]
[Bottom]
4
Set [WipeAspect] in the [Trim] column.
f The aspect ration of the wipe pattern is changed when anything other than [Off] is selected in [WipeMask] in the [Mode] column.

Setting the priority

Set the priority (image positioning). The default setting is as shown in the following figure.
1
Select the <ME1>/<ME2> button → [MISC] → [Key Priority] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [Key Priority] column.
f Select the priority for any key from [1st], [2nd].
f Changing the setting of one item will change the settings of other items accordingly. In the default setting, if [Key1], [PinP1] is changed from [2nd]
to [1st], then the settings of [Key2], [PinP2] also change as follows.
- [Key2], [PinP2]: [1st] → [2nd]

Setting [Key Link]

Combine [Key1], [Key2], [PinP1], [PinP2] in the same ME to start transitions simultaneously.
1
Select the <ME1>/<ME2> button → [MISC] → [Key Link] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [Key On Link] column.
f Select [Off], [Group1] or [Group2] for any key.
Keys that were set in the same group operate in conjunction.
Example) When [Key1], [PinP1] is set to [Group1], and [Key2], [PinP2] is set to [Off]
Pressing the <KEY1 TRNS> button starts transitions of [Key1], [PinP1] and [Key2], [PinP2] at the same time.
Chapter 5 Basic Operations — KEY
[50]
[Top] [40]
[0]
[Bottom] [−40]
[−50]
[−50]
[−40]
[Left]
Trimming is performed.
Changes the settings in such a way that the [Left] and [Right] trimming amounts, and the [Top] and [Bottom] trimming
amounts are the same. (This makes for a top-bottom and left-right symmetry.)
Trims using the values set with [Trim Adjust1] and [Trim Adjust2].
Sets the left trimming value.
Sets the top trimming value.
Sets the right trimming value.
Sets the bottom trimming value.
Background image
[Key1], [PinP1]: [2nd]
Area trimmed
PinP effective area
Original size of PinP
[0] [50]
[40]
[Right]
[Key2], [PinP2]: [1st]
– 68 –