Boot operation settings
Boot mode settings
1
Select the <SYS> button → [BOOT] → [Boot] tab.
2
Select an item in the [Boot Mode] column.
f Select the status of the switcher when it boots up.
[Resume]
[Initial]
[Project]
Chapter 8 System Menu — Boot operation settings
The switcher boots up with the settings as they were immediately before it was turned off.
The switcher boots up with the initial settings as they were when it was delivered.
The switcher boots up with the settings found in the specified project file.
f Specify the project file by selecting [File Select] and then specifying it in the file selection dialog.
f It is not possible to make settings to the detailed items loaded from the specified project file.
– 131 –