System Manager Unit Av-Lss10; Rear Panel - Panasonic Live Production Suite Series Operating Manual

System Manager Unit AV-LSS10

Rear panel

1 <LAN1> terminal (connector: RJ-45/signal: 1000BASE-T)
Used to connect the units in the switcher system or the control panel.
Use a GbE hub, etc., and connect all of the units according to the system connection plan.
2 <LAN2> terminal (connector: RJ-45)
For a future expansion feature. Do not connect a cable.
3 <AC IN 1>, <AC IN 2> terminals (signal: AC)
Connect the supplied AC Cables and insert each into an AC outlet. (AC100 V to 240 V, 50 Hz/60 Hz)
f The supplied AC Cables have 3-pin plugs with grounding terminals. Plug into 3-pin outlets equipped with grounding terminals.
f If you are unable to use 3-pin outlets, be sure to contact the place of purchase.
@ NOTE
t The shielded cables to be connected to the <LAN> terminals should conform to 1000BASE-T.
Chapter 3 Part Names and Functions — System Manager Unit AV-LSS10
– 22 –