Layout Of Display Icons - Panasonic Live Production Suite Series Operating Manual

[Last]
[Lead]
[Loop]
6
Select an item in [Reverse] in the encoder menu.
f Select the playback direction.
[Off]
[On]
7
Select an item in [Variable] in the encoder menu.
f Select the speed for variable speed playback. The available speeds are as follows.
[×1], [×2], [×4], [×8], [×1/2], [×1/4], [×1/8]
r Relationship between the amount of transition by the fader lever and Clip playback
f When [Fader] is selected in [Link Target] in the encoder menu, the following settings in the [Play Clip] tab are disabled.
[Play], [Pause], [Stop], [Variable], [<Step], [>Step]
f When [Mode] in the encoder menu is set to [Loop], the behavior will be as for [Lead].
Amount of transition
PGM-A
PST-B
Clip playback
[Mode]: [Lead]
[Reverse]: [Off]
Clip playback
[Mode]: [Last]
[Reverse]: [On]
Trimming moving images
Set the position where the playback of the moving images is to start (IN point) and the position when it is to end (OUT point). Moving images that have
been trimmed are played back from the IN point to the OUT point.
1
Select the <MEM> button → [CLIP] → [Edit] tab.
2
Select an item.
f When [Pause] in the [Play Clip] tab is selected after playback, moving images can be stopped at any frame.
[Trim In]
[Trim Out]
[Trim In CLR]
[Trim Out CLR]
@ NOTE
t When a moving image is saved to a memory card or a local computer, and when a moving image is saved to a project file, only the trimmed portion is
saved.
t When a moving image is saved in the register memory, the video before trimming and the trimming position are recorded.
t The same position cannot be specified for the IN point and the OUT point. The minimum unit for trimming is two frames.

Layout of display icons

Current icons
r Current icon of still image
The following icons are displayed across the top of the pages in the tabs shown when you select top menu <MEM> button → [STILL]. The icon is used
for channel selection.
Chapter 5 Basic Operations — Video memory
Stops at the last frame after playback.
Returns to the first frame after playback.
Connects the last frame and the first frame to loop the playback.
Plays back moving images in the forward direction.
Plays back moving images in the reverse direction.
In point
Standby Playback
Lead
Standby Reverse
Last playback
Sets the current frame as the IN point of trimming.
Sets the current frame as the OUT point of trimming.
Releases the trimming settings of the IN point.
Releases the trimming settings of the OUT point.
Out point
Standby Playback
Lead
Standby Reverse
Last playback
– 99 –
Standby Playback Reverse
Lead playback
Standby Reverse Playback
Last playback