Table of Contents
Advertisement
Chapter 2 Installation and Connection — Installation
f Screws for attaching the rack mount fittings and rear panel support fittings and for attaching to the rack are not supplied with this unit.
f Securely affixed with screws that match an appropriately sized rack.
f Secure sufficient space around the ventilation holes at the front and side of the front cover.
f Do not install the unit in a manner in which the unit or cables can be easily damaged.
f Avoid installing the unit where it will be exposed to direct sunlight or to the hot air that is blown out from other products.
f Installing the unit in a very humid, dusty, or vibration-prone location may cause malfunction.
Installing the Control Panel AV-HS60C2/AV-HS60C4
When installing or connecting the unit, be sure to ask your dealer.
r Connecting the power supply
f Connect the <SIGNAL GND> terminal on the rear panel of the unit to the ground of the system.
f Use the Control Panel AV-HS60C2/AV-HS60C4 with both the power supply 1 and the power supply 2.
An alarm is displayed when there is no AC power input to the power supply 1 and the power supply 2 or when the power switch is set to <OFF>.
r Handle carefully.
f Dropping the unit or subjecting it to strong impact or vibration may cause trouble and/or malfunctioning.
r Do not allow any foreign objects to enter inside the unit.
f Allowing water, metal items, scraps of food or other foreign objects inside the unit may cause a fire and/or electric shocks.
r Choosing the best installation location
f This unit is a device for indoor use only.
– 13 –
Advertisement
Table of Contents
