EPSON Perfection 3200 Photo
3. Attach the tension spring to the two hooks on the driven pulley assembly.
( See Figure 5-2 )
Figure 5-2. Timing Belt Tension Adjustment (2)
adjustment
4. Install the two screws. ( See Figure 5-3 )
5. Remove the tension spring.
Figure 5-3. CR Timing Belt Tension Adjustment (3)
Make sure to work operation on a flat table, during the
C A U T I O N
adjustment.
Adjustment Outline
Revision A
CBS Screws(3x5)
Tightening Torque
6-8kgfcm
55