Epson Perfection 3200 Start Manual

Start Here
EPSON Perfection
1

Unpack Your Scanner

1
Make sure you have everything:
Note: If you'll be connecting your scanner using IEEE 1394 (FireWire,
iLink™), you need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large sticker in place
until instructed to remove it.
IMPORTANT!
Leave the sticker in
place until you are
instructed to remove it.
3
Insert the hinges on the cover
into the square holes at the
back of the scanner. (Make
sure the cable does not get
caught under the scanner
cover.) Close the cover.
2

Install the Software

Wait! You must install your software before connecting the scanner
to your computer. The install process may take up to 15 minutes.
Be sure to close all open programs and turn off any virus
protection programs.
If you don't already have Adobe Photoshop or Photoshop Elements on your
computer, install Photoshop Elements from the CD-ROM included with your
scanner. To view the Photoshop user manuals, you'll need Adobe Acrobat
®
Reader (included on your Photoshop Elements CD).
Windows
First you'll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive. The installer starts automatically.
2
Make sure US English is selected and click Next.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
Scanner
CD-ROM with EPSON
Scan driver, software,
and electronic manuals
®
LaserSoft SilverFast
CD-ROM
Adobe ® Photoshop
2.0 CD-ROM
®
® 3200 Photo
®
®
SE
® Elements
Scanner cover/
transparency unit
USB cable
Film holders
continue
®
®