Epson Perfection 3200 Pro Quick Start Manual

Start Here
EPSON Perfection ® 3200 Pro
1

Unpack Your Scanner

1
Make sure you have everything:
Scanner cover/
transparency unit
Scanner
CD-ROM with EPSON ®
Scan driver, software,
USB cable
and electronic manuals
LaserSoft ® SilverFast ® Ai6
CD-ROM
Adobe ® Photoshop ® Elements
2.0 CD-ROM
Film holders
ArcSoft ® Software Suite
CD-ROM
MonacoEZcolor 2 CD-ROM
Note: If you'll be connecting your scanner using IEEE 1394 (FireWire,
iLink™), you need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large sticker in place
until instructed to remove it.
IMPORTANT!
Leave the sticker in
place until you are
instructed to remove it.
3
Insert the hinges on the cover
into the square holes at the
back of the scanner. (Make
sure the cable does not get
caught under the scanner
cover.) Close the cover.
2

Install the Software

Wait! You must install your software before connecting the scanner
to your computer. The install process may take up to 15 minutes.
Be sure to close all open programs and turn off any virus
protection programs.
If you don't already have Adobe Photoshop or Photoshop Elements on your
computer, install Photoshop Elements from the CD-ROM included with your
scanner. To view the Photoshop user manuals, you'll need Adobe Acrobat
®
Reader (included on your Photoshop Elements CD).
Windows ®
First you'll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive. The installer starts automatically.
2
Make sure US English is selected and click Next.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
continue
4
When you see this screen, click the Adobe Photoshop Elements
button.
5
Follow the on-screen instructions. When you're asked for a software
serial number, enter the number printed on the sticker attached to the
CD-ROM sleeve.
6
If you don't have Acrobat Reader, eject the CD-ROM and repeat
steps 1 – 3. Then select Adobe Acrobat Reader to install it.
Continue with the instructions below to install the scanner software.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
The installer starts automatically.
If it doesn't start, double-click My Computer (in Windows XP, click
Start > My Computer), double-click EPSON, then double-click
EPSON.
2
When you see a message asking you to select a language,
click English.
®
3
At the Software Installation screen, click Install.
4
Read the license agreement, then click Agree.
5
Follow the on-screen instructions to install each program. After each
one is installed, click Next or Finish to continue. Note that EPSON
Smart Panel™ installs in several steps. If you have PDA (Palm™ or
Pocket PC) software on your computer, Presto! PixExpress will be
installed.
6
Click Exit. The EPSON Product Registration screen appears.
7
Register your scanner as instructed. At the last screen, click Done or
close your browser.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under "Connect the Scanner."
Macintosh ®
®
First you'll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2
Double-click the or CD-ROM icon and double-click the
English folder.
3
Double-click the Install Photoshop Elements icon.
4
Follow the on-screen instructions to begin installation and accept the
®
software license conditions. In Mac OS X, enter your Administrator
name and password, then click OK.
5
When you're asked for a software serial number, enter the number
printed on the sticker attached to the CD-ROM sleeve.
6
When you see this screen, click the Install button.
Click
Adobe
Photoshop
Elements
7
Follow the on-screen instructions to install the software.
8
When you're finished, click Quit.
9
If you don't have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Reader
Installer icon to install it.
Continue with the following instructions to install the scanner software.
Scanner Software for Mac OS 8.6 – 9.x
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
(If necessary, double-click the
2
Double-click .
3
When you see a message asking you to select a language,
click English.
4
When the Software Installation screen appears, click Install.
Click Install
5
Read the license agreement, then click Agree.
6
When you see the EPSON Scan Installer, click Install.
When the EPSON Scan installation is complete, click Restart.
Don't remove your CD-ROM. After your Macintosh restarts,
you can install the rest of your software.
7
When your Macintosh restarts, double-click the
icon to open it, if necessary, then double-click
You see this screen:
8
Click Install and follow the on-screen instructions to install each
program. After each one is installed, click Quit to continue. Note
that EPSON Smart Panel installs in several steps. If you have PDA
(Palm) software on your computer, Presto! PixExpress will be installed.
9
Click Exit. The EPSON Product Registration screen appears.
10
Register your scanner as instructed. At the last screen, click Done or
close your browser.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under "Connect the Scanner."
continue
Scanner Software for Mac OS X
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
2
Double-click the
English folder.
Click
Install
3
Double-click the EPSON Scan Installer icon.
4
Enter your Administrator name and password and click OK.
5
When you see the EPSON Scan Installer window, click Install,
then follow the on-screen instructions.
EPSON CD-ROM icon to open it.)
6
Double-click the Reference Guide icon.
7
Click Install to install your Scanner Reference Guide.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under "Connect the Scanner."
3

Connect the Scanner

Click
Install
After your software is installed, it's time to get connected.
1
Remove the sticker from the transportation lock. Use a coin to turn
the lock clockwise one-quarter turn to unlock the scanner carriage.
EPSON CD-ROM
. Click English.
2
Remove the sticker from the back of the scanner.
Remove sticker
Click Install
3
Connect the cable for the built-in transparency unit to the round
connector on the back of the scanner. You may need to raise the
scanner cover and twist the cable to insert it.
continue
EPSON CD-ROM icon and then double-click the
Click Install
Make sure the
arrow faces up
continue
Turn over