Message Length; Call Screening; Message Alert; Remote Password - Motorola ML25255 Full User Manual

2. Using VOL + and VOL - of the navigation button to scroll to
softkey.
3. Using VOL + and VOL - of the navigation button to scroll to your selection. You can choose
from 2 RINGS up to
4. Press SELECT softkey to save your selection.
NOTE
'Toll Saver' can save you the cost of a call when you access your message from another phone.
• If you have new messages, the unit answers after the 3
• If you have no new messages, the unit answers after the 5
•
You can hang up after the 3
8.7.8

Message Length

From the ANSWERING SYS.
1. Using VOL + and VOL - of the navigation button to scroll to
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
softkey.
3. Using VOL + and VOL - of the navigation button to scroll to
4. Press SELECT softkey to save your selection.
8.7.9

Call Screening

If you wish incoming messages to be played over the speakerphone, activate the Call Screening
feature. To take the call, press the corresponding LINE button on base or
cordless handset and the Answering System will stop recording.
ANSWERING SYS.
From the
1. Using VOL + and VOL - of the navigation button to scroll to
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
SELECT
3. Press softkey to save your selection.

8.7.10 Message Alert

This feature set your Answering System to give an alert tone every 10 seconds when there are
new messages.
ANSWERING SYS.
From the
Using VOL + and VOL - of the navigation button to scroll to
1.
SELECT softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
SELECT
3. Press softkey to save your selection.
8.7.11

Remote Password

You can access the Answering System from a tone dialing telephone in another (remote) location.
To do this, you must turn on the remote function and set a three-digit remote password.
The remote password is required for remote access, and it prevents unauthorized access to your
Answering System.
From the ANSWERING SYS.
1. Using VOL + and VOL - of the navigation button to scroll to
softkey.
2. The base will display the last-set remote password (or, if the device is new or has been reset to
default, the base will display 000).
3. Press CLEAR softkey to delete the current remote password.
4. Using the dial pad to enter your new 3-digit remote password.
5. When you are finished, press
8.8

Restore Settings

The feature allows you to reset some menu settings to the original default settings.
1. In idle mode, press
24
6 RINGS, or TOLL SAVER.
or 4 ring and save the pay telephone or long distance charge.
rd th
menu:
menu:
menu:
menu:
SAVE
softkey.
MENU softkey (on base) or Menu/Flash (on cordless handset) to go to the
LINE 1 or LINE 2
ring.
rd
ring.
th
MESSAGE LENGTH. Press
LINE 1 LINE 2
or
1 MINUTE, 2 MINUTES
LINE softkey on the
CALL SCREENING. Press
ON or OFF.
MESSAGE ALERT. Press
ON or OFF.
REMOTE PASSWORD. Press
and press SELECT
SELECT
SELECT
and press
or 3 MINUTES.
SELECT
SELECT