Tone/Pulse Dial; Area Code; Registration; Register - Motorola ML25255 Full User Manual

From the PHONE SETTINGS
1. Using VOL + and VOL - of the navigation button to scroll to
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
3. Press SELECT softkey to save your selection.
NOTE
The default setting is OFF.
8.3.4

Tone/Pulse Dial

The Dial Mode of Line 1 and Line 2 can be set individually for each line.
PHONE SETTINGS
From the
1. Using VOL + and VOL - of the navigation button to scroll to
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
softkey.
3. Using VOL + and VOL - of the navigation button to scroll to
4. Press SELECT softkey to save your selection.
8.3.5

Area Code

The telephone uses the pre-programmed area code to determine the number format to display
when a valid Caller ID record is received. The pre-programmed area code is also used for the
Dialing Back feature.
PHONE SETTINGS
From the
Using VOL + and VOL - of the navigation button to scroll to
1.
2. Using the dial pad to enter your 3-digit area code.
3. When you are finished, press
8.3.6

Registration

A cordless handset will not operate until it is registered to the base.
During the registration process, keep the cordless handset near the base. Up to 10 cordless
handsets (in total) can be registered to one base.
NOTE
If the cordless handset has not been registered to the base, the display will show
TO INITIATE REGISTRATION
registration.
If the cordless handset does not display the

REGISTER

option is available in the
8.3.6.1 Register
From the PHONE SETTINGS
1. Using VOL + and VOL - of the navigation button to scroll to REGISTRATION. Press
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to REGISTER. Press
3. The screen will display
4. Press and hold PAGE button on the base for about 3 seconds.
5. The base will display
If registration is successful, both phones will beep and display
registration is not successful, move the phones closer together and try again.

8.3.6.2 Remove Handset (handset menu option)

De-registration cancels registration.
During the de-registration process, keep the cordless handset near the base.
It is not recommended that a cordless handset be deregistered unless absolutely necessary
because once it is deregistered, that handset's telephone features cannot be used until the
handset is re-registered.
18
menu:
menu:
menu:
SAVE softkey.
once the handset has been activated. Press
PRESS "REG" TO INITIATE REGISTRATION
PHONE SETTINGS - REGISTRATION
menu:
PRESS BASE UNIT PAGE BUTTON UNTIL BEEP.
REGISTERING... to indicate the base is now in registration mode.
AUTO ANS INTERCOM. Press
ON or OFF.
TONE/PULSE DIAL. Press
LINE 1 LINE 2
or and press
TONE or PULSE.
AREA CODE. Press SELECT
PRESS "REG"
REG
softkey to start the
message, the
menu.
SELECT
SELECT
REGISTRATION COMPLETE!
SELECT
SELECT
SELECT
softkey.
softkey.
If