Page 6
CAUTION: PLEASE DO NOT USE ALKALINE OR NON- RECHAREABLE BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO THE UNIT AND VOID THE WARRANTY. Non rechargeable batteries can explode and cause injuries and heavy damage on your environment. For fully discharged batteries, the handset will power on after a 15-minute precharge.
Page 7
Digital Answering Machine with up to 40 minutes recording capacity, 59 messages capacity...
1. Display 2. Up / Down / Menu / Redial / Volume 3. Delete/Mute key Press to delete digits or letters in the display. During a call press to stop your caller from hearing you. 4. Talk/End call key - Press to receive, make and end calls. 5.
Page 10
Note : there is no indication on the display when you are in hands-free mode.
Page 12
Changing the Handset Volume You can adjust the handset volume during a call (external or internal), the volume level is displayed. There are 5 different volume levels. During a call: 1. Press the key to adjust the handset volume.
Handset Default Settings External Ringer Melody Melody1 VIP Ringer Melody Melody2 Ringer Volume Level 3 Receiver Volume Level 3 External Call Ring On/Off ON Internal Call Ring On/Off ON Page Prefix Number Empty Language English Auto Answer Handset Owner Name DECT...
General 1. In the idle (standby) mode, press Turn Answering Machine On / Off Set the Day and Time Record your outgoing Announcement Set your Remote Access code Set 'Announce Only' On / Off Turn audible Message Alert On / Off Set Base ringer On / Off Set number of Rings to answer Voice prompt language selection...
"Please leave your message after the beep." "I am sorry that I am not available. Please call back later." How to Record Y our Announcement Recording Announcement A1 (Announce Only set to OFF) Press until you hear 'Announcement One Press .
Set 'Announce Only' On / Off (preset to OFF) If you want callers to leave messages, Announce Only must be set to OFF . If you do not want callers to leave messages, set Announce Only to ON . Follow the steps in the beginning of the Setup section. Turn Audible Message Alert On / Off With Message Alert programmed ON , the Base unit will beep approximately every 10 seconds, alerting you to new, unplayed messages and memos.
Message Playback 1. Press the Play key. The prompt will tell you how many new and old messages are stored in that Mailbox. If there are one or more new messages, only the new messages will be played. After new message playback is completed, you can press the Play key again to hear all old messages.
Using the phone Selecting the language / 5-LANGUAGE / Making internal calls / 030123... or 030123... / Making external calls / 030123... or switch on/off during a call with Hands-free mode Taking calls End call Redialing Prefix dialing press for 2 seconds During a call / Changing the handset volume Dialing from the phone book...
Page 24
Phone Book Store entries / 2-PHONE BOOK / NO / 030123... / RING / Store VIP entries / 2-PHONE BOOK / NO / 030123... / RING / List entries / 2-PHONE BOOK / Edit call numbers / 2-PHONE BOOK / Edit call numbers, VIP entries / 2-PHONE BOOK / Delete call numbers...
Record a Memo Press and hold 'Now Recording' / Speak towards the Base Unit / Play key / new messages are played / Play key to hear Message Playback all old messages Deleting Messages To delete all old messages stored in a Mailbox: In the idle mode, press &...
Page 27
WARRANTY INFORMATION Distributor guarantees to you, the original purchaser, the digital cordless telephone and accessories which you have purchased from an authorised reseller (the "Products"), to be in conformance with the applicable specifications current at the time of manufacture for a term of 12 months from date of purchase of the Product(s) (Warranty Term).
Page 28
As a consumable product, the specifications indicate that you should be able to obtain optimum performance for your digital cordless telephone within the first two months from date of purchase.
Page 29
Please make and retain a note of all data you have inserted into your Product for example names and phone numbers, before submitting your Product for a Warranty service as such data may be deleted or erased as part of the repair or service process. OUT OF WARRANTY REPAIRS If you request Distributor to repair your Product any time after the Warranty term or where this warranty does not apply due to the nature of the defect or fault, then...