Motorola ML25255 Full User Manual page 14

IMPORTANT
If you are not going to use the telephone for more than 30 days, remove the batteries because
they can leak and damage the unit.
3. Plug the power supply cord into the power jack on the back of the base and the other end into
an electrical outlet.
Caution: To reduce risk of personal injury, fire, or damage use only the base power
adaptor supplied. This power adaptor is intended to be correctly orientated in a
vertical or floor mount position.
4. Connect the telephone line cords:
If you have 2 single-line wall jacks installed in your home or office, you can use adaptors/
couplers (not included) to combine the 2 single telephone lines into 1 dual lines. The adaptor/
coupler may look similar to the one pictured here and can be purchased from your local
telephone products retailer.
Line 2
Or, you can use the 2 single telephone lines plug into the 2 jacks on the back of the telephone.
Line 2
If you have Line 1 and Line 2 wired into one wall jack in your home or office, you can use one
of the supplied telephone line cords to connect from the wall jack to the Line 1+2 jack on the
back of the phone as shown below.
14
Line 1
Line 1
Line 1 + 2