Mircom TAS-2000 Series Installation And Operation Manual page 55

Sort By Name
Place arrow on Sort by Name and press `0' and the next screen will be:
NOTE: The system will sort the entered data by name, but should there be a power failure or reset the
names will returned to the order in which they were entered.
Sort By Dial Code
Place arrow on Sort by Dial Code and press 0 and the next screen will be:
NOTE: The system will sort the entered data by dial code, but should there be a power failure or reset the
names will returned to the order in which they were entered.
Select Language
The default language is English. If the Multi Language selection is entered, the opening screen flips through all the
three languages, once a key is hit as one of the languages is on screen, then all the following messages will be in
that language.
0=English
1=French
2=Spanish
3=Multi Language (English and French)
Press # key to go back to the programming menu.
NOTE: The system must be Reset after selecting French, Spanish or Multi Language for the selection to
be activated.
Sorting please wait...
Sorting please wait...
Enter Language [_]
0=E 1=F 2=S 3=M
Press # to go back to programming menu.
Page 53