Mircom TAS-2000 Series Installation And Operation Manual page 53

This function defines the key which will be pressed by the resident to open the main door, the default is 9. Press
any other number if you wish to change this. NOTE: for pulse phones, make the DTMF key higher than 5 to avoid
interpretive problems. Press # to go back to programming menu.
Aux Door DTMF
Place arrow on Aux Door DTMF and press 0 and the next screen will be:
Aux Door DTMF
[ 6 ]
This function defines the key which will be pressed by the resident to open the auxiliary door, the default is 6.
Press any other number if you wish to change this. Press # to go back to programming menu.
Online Timer
Place arrow on Online Timer and press 0 and the next screen will be:
Online Timer
[ _ _ 6 0 ]
This function defines the length of time that a visitor may be on the phone with a resident, the default is 60 seconds.
Enter any other numbers if you wish to change this, the number represents time in seconds. Press # to go back to
programming menu.
Door Timer
Place arrow on Door Timer and press 0 and the next screen will be:
Door Timer
[ 1 0 ]
This function defines the length of time that the door will be open; the default is 10 seconds. Enter any other
numbers if you wish to change this. Press # to go back to programming menu.
Change Password
Place arrow on Change Password and press 0 and the next screen will be:
Change Password
[ _ _ _ _ _ _ _ _ _ _ ]
The password is 9 digits, enter numbers 1111111111 to change the password from the default. If the new
password is forgotten, call our Factory for the master code.
Set Time and Date
Page 51