Table of Contents
Advertisement
10.4.3. New assignment of all QE1008-W sensors
For a new assignment of all QE1008-W sensors, all current (saved) assignments of the wireless
receiver can be deleted at the same time.
You cannot delete just one saved assignment on the receiver.
Sequence step 1
1.
The wireless receiver must be connected to the computer. (the wireless receiver is
automatically in operation mode)
2.
Unscrew the cover of the wireless receiver.
3.
Press and hold the blue button
→ All assignments are deleted.
4.
Press the blue button
button several times in succession to select the respective assignment slots (apparent from
01
the dual LEDs
slot with the corresponding slot number.
01 8 dual LEDs represent 8 assignment slots
(1.1) (1.2) (2.1) (2.2) (3.1) (3.2) (4.1) (4.2)
02 Blue function key
5.
The selected assignment slot is ready for a logon or new assignment.
The wireless receiver now searches for a sensor.
28
02
~10 seconds until all LEDs come on once.
02
briefly once. The first assignment slot (1.1) is selected. Press the
which come on). Each dual LED (red/green) represents one assignment
Subject to technical modifications
01
02
Advertisement
Table of Contents
