Servicing - gefran QE1008-W SET Operating Manual

System for tie bar measurement with wireless transmission
Table of Contents

Advertisement

Replacing the batteries
1.
Switch off the sensor
2.
Carefully remove the plastic cover.
3.
Replace the rechargeable batteries
4.
Close the cover using the four M2.5 x 20mm pan-head screws
Normal AAA batteries can be used in an emergency. These may only
be used temporarily and must be replaced as soon as possible with
rechargeable batteries!
Normal AAA batteries must NOT be charged!

12.2. Servicing

The QE1008-W sensors should be calibrated every 12 months. In order to calibrate them, the
sensors must be sent to Sensormate AG.
Trained and qualified staff of Sensormate AG can recalibrate the QE1008-W sensors.
34
Plastic cover
rechargeable batteries
Subject to technical modifications
AAA
NiMH

Advertisement

Table of Contents
loading

Table of Contents