Cisco NCS 4000 Series Manual page 50

Mounting the Chassis into a Rack
Step 3
Move the chassis. With at least two people, stand in front of the chassis and carefully push the chassis into the rack.
Step 4 Move the lift aid away from the front of the chassis.
Step 5 Push carefully until the mounting brackets contact the rack mounting bracket with the vertical rack posts. Someone
should be in the rear guiding the chassis into the rack.
Step 6 Insert and partially tighten the 16 screws (8 on each side) to attach the chassis mounting brackets to the rack mounting
brackets.
Figure 22: Chassis Mounting Holes
Cisco Network Convergence System 4000 Series Unpacking, Moving and Securing Guide
42
Securing the Chassis