Installing the Mounting Brackets
Prerequisites
Make sure that you have the correct type of mounting brackets to suit your rack type. There are three different
types of mounting brackets for the three types of racks (ANSI 19-inch or 23-inch or ETSI).
Required Tools and Equipment
• Number 1 Phillips screwdriver
• Cisco NCS 4016 installation kit (NCS4K-INST-KIT=)
Installing the Mounting Brackets
To attach the mounting brackets, simply fix each bracket onto the chassis using six screws as shown in the
figure, below.
Figure 11: Attaching Chassis Mounting Brackets
Cisco Network Convergence System 4000 Series Unpacking, Moving and Securing Guide
28
Securing the Chassis