Cisco NCS 4000 Series Manual page 21

Unpacking the Chassis
Step 2
Using the 3/8-in. socket wrench, remove the 4 hex cap bolts that connect the right support bracket to the pallet.
Step 3 Set the support bracket aside carefully.
Step 4 Repeat Step 1 through Step 3 for the left support bracket.
What to Do Next
What to Do Next
After you have removed the support brackets that secure the chassis to the pallet, go to the
Chassis to a Mechanical Lifting Device, on page 15.
Cisco Network Convergence System 4000 Series Unpacking, Moving and Securing Guide
Removing the Chassis from the Pallet
Transferring the
13