Cisco NCS 4000 Series Manual page 26

Transferring the Chassis to a Mechanical Lifting Device
Step 2
Prepare to use the mechanical lifting device by placing a piece of plywood or Masonite on the surface of the lift (to
prevent damaging the lower air plenums).
Step 3 With at least two people, move the chassis carefully from the pallet onto the lifting device as shown in th figure, below.
The chassis has lifting handles at either side.
Figure 7: Chassis Handle
1
Other resources might be required to ensure a safe chassis transfer. We recommend using as many people as
Note
required to move the chassis at your site safely. Always follow safety precautions when moving a chassis.
Caution When moving or mounting the chassis, be careful not to apply pressure to the horizontal fiber management
areas on the chassis, or they may bend or break.
Cisco Network Convergence System 4000 Series Unpacking, Moving and Securing Guide
18
Chassis handle
Moving the Cisco NCS 4016 Chassis