Safety Precautions - Launch X-431 ADAS PRO User Manual

1 Safety Precautions

The X-431 ADAS PRO calibration tool is exclusively intended for use on a vehicle. To
avoid personal injury, property damage, or accidental damage to the product, read all
of the information in this section before using the product:
 To operate the X-431 ADAS PRO calibration tool properly, user must have
knowledge of automotive technology and is therefore aware of the sources of
danger and risks in the repair shop and on vehicles.
 All notes given in the individual sections of the operating instructions apply. In
principle it is required to follow the steps and safety precautions stated below.
 Furthermore, pay attention to all general instructions from labor inspectorates,
trade associations and vehicle manufacturers as well as all laws, legal ordinances
and instructions which have to be commonly obeyed by a repair shop.
The safety messages herein cover situations LAUNCH is aware of. LAUNCH cannot
know, evaluate or advise you as to all of the possible hazards. You must be certain that
any conditions or service procedure encountered do not jeopardize your personal
safety.
On Using X-431 ADAS PRO Calibration Tool
In order to avoid incorrect handling and injury to the user or destruction of the X-431
ADAS PRO calibration tool arising from this, pay attention to the following:
 Only assemble the X-431 ADAS PRO calibration tool according to the operating
1
X-431 ADAS PRO Calibration Tool User Manual
Warning symbols and definitions
This safety alert symbol is used to alert you to potential injury
hazards. Obey all safety messages that follow this symbol to
avoid possible injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury to the operator
or to bystanders.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury to the operator or to
bystanders.
Addresses practices not related to personal injury.