Attaching The Wheel Clamp To The Vehicle's Tyre - Launch X-431 ADAS PRO User Manual

when storing the wheel clamp. See Fig. 3-10c. Doing so may destroy the installation of the
laser module and cause calibration error.

3.6.3 Attaching the wheel clamp to the vehicle's tyre

After properly installing the wheel clamp, you need to attach the wheel clamp to the
vehicle's tyre.
1. Hold the handle to install the wheel clamp on the tyre making sure the laser beam
output (1) of laser module points towards the calibration tool.
2. Use the adjustment screw (4) to slowly slide out the attachment bracket (1) until it
fits the tyre's size and the level gauge bubble is centred.
3. Tighten the adjustment screw so that the wheel clamp can gently attach on the
vehicle's tyre.
X-431 ADAS PRO Calibration Tool User Manual
Fig. 3-11
Fig. 3-12
20