Table of Contents
Advertisement
3.2 Base Support
No.
Upper cover
It should be removed before installing the beam lifter. It is divided into
1
two parts. The part installed with the name plate should be installed on
the other part.
Adjustment screws
2
Use the adjustment screws to balance the base support.
Rolling caster
3
Allows you to move the tool from one place to another place.
Fixing baffle
4
For securing the upper cover.
Mouting hole
5
For securing the beam lifter.
X-431 ADAS PRO Calibration Tool User Manual
Fig. 3-2
Description
10
Advertisement
Table of Contents
