Removing And Installing Body Panels; Fender; Belt Cover - CanyCom SC45 Operator's Manual

Removing and Installing Body Panels

• Cut or pinch hazard exists when removing or installing body panels; beware of
sharp edges and pinch points.
• Make certain to reinstall panels after removing for repairs or inspection.

Fender

Screw
Fender
3577M-6107-0504-010
Hole
3573M-0504-020US

Belt Cover

5377M-0504-010US
Maintenance
Removing
1.
Screw
Installing
1.
Pin
2.
Removing
Bolts
1.
Installing
1.
-35-
Remove two screws that secure fender.
Remove fender.
Put fender back in its place. Align hole on
fender with pin on chassis and move fender
so that pin mates with hole.
Install two screws.
Remove two screws that secure belt cover.
Remove belt cover.
Put belt cover back in its place. Install two
bolts.
5