Driving - CanyCom SC45 Operator's Manual

Driving

• Do not allow bystanders to come near machine when driving.
• Set handle lever in a proper position for the operator. Setting them in an
improper position may hinder safe operation.
• Always make certain of the safety of your surroundings before driving; start
slow. Adjust speed according to the condition and gradient of the surface on
which you are traveling.
• Do not a make sudden start, acceralation, change of speed, change of direction,
or stop. Do not turn at high speed. Avoid sudden maneuvers; this may cause
the operator to be dragged or to be thrown, or machine to tip over.
• Never drive machine with its loading deck in raised position. Make certain that
loading deck is in the lowest and locked position when driving.
• Shift auxiliary transmission to [Low] position and drive slowly when traveling
on a slope. Operator can be dragged or thrown, or machine can tip over.
• Do not drive machine across a slope. Machine can slip or tip over.
• Do not turn on a slope. Machine can turn the opposite direction, slip or tip over.
• Use an observer to help direct machine when the visibility is poor, terrain is
rugged or hilly, or maneuvering room is limited. The observer should be able
to see machine and its immediate surroundings, and should give pre-arranged
signals to direct the operator.
• Do not turn main switch to [
Operation
(stop)] position while driving.
-19-
4