Extron electronics PowerCage 401 Setup Manual page 4

F Configuration port — If desired, connect a host device to the front panel USB mini-B port for configuring the enclosure (see
figure 4 on page 3).
NOTE: This port allows communication to the enclosure and the boards.
G LCD screen — The screen displays messages, menu information, and your selections (see Menus, Configuration, and
Adjustments).
H Reset LED — Lights green after pressing the Reset button.
I Reset button — Pressing the Reset button sets various enclosure settings to the factory default values.
J Menu navigation button — Press Menu to access the PowerCage 401 menu system (see Menus, Configuration, and
Adjustments).
K Next navigation button — From each menu press Next to step through submenus (see Menus, Configuration, and
Adjustments).
L Horizontal adjust knob — Turn the horizontal adjust knob to navigate the menu system (see Menus, Configuration, and
Adjustments).
M Vertical Adjust knob — Turn the vertical adjust knob to navigate the menu system (see Menus, Configuration, and
Adjustments).
N Power supply 2 LED — See the
O Fan 3 — For power supply 2
P Fan 4 — For power supply 2
Menus, Configuration, and Adjustments
The PowerCage 401 enclosure has a menu system consisting of four main menus that are selected by pressing the front panel
Menu button (see figure 4,
accessed by pressing the front panel Next button (
to make any submenu adjustments. See the following flowcharts.
Extron
Power
PowerCage 401
On
5 sec.
2 sec.
60-1492-01
FW v1.00.xxx
2 sec.
Menu
SLOT MENU
Menu
Next
FRAME STATUS
MENU
Next Menu
VIEW COMM
SETTINGS MENU
Menu
Next
EXIT MENU
Menu
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
4
Power Supply Status
J on page 3) See the figure on previous page. Each main menu consists of submenus that are
K
). Use the front panel Horizontal (
Default
Cycle
Extron
Power
PowerCage 401
On 5 sec.
2 sec.
60-1492-01
FW v1.00.xxx
Menu
2 sec.
Menu
Menu
Next
on the Extron website.
© 2016-2020 Extron Electronics — All rights reserved.
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
table on page 3.
Default Cycle
Slot #2 Slot #3
Slot #1
2 sec. N/A 2 sec. Fox DR HD
Fox DT HD
www.extron.com
L M
) and Vertical ( ) Adjust knobs
Slot #4
2 sec. N/A
Menu
68-2640-50 Rev. B
SLOT MENU
06 20