I User Alerts - Zodiac TornaX Genius Installation And User Manual

5.2 I User alerts

Flashing LED:
Tip: if you require assistance, inform your retailer about the appliance's condition to save time
Provide this information to your retailer
Recycling
This symbol means that your appliance must not be thrown into a normal bin. It will be selectively
collected for the purpose of reuse, recycling or transformation. If it contains any substances that may be
harmful to the environment, these will be eliminated or neutralised.
Contact your retailer for recycling information.
16
• Check that the cleaner is correctly connected to the control box.
If necessary, unplug it and reconnect it following the appropriate
procedure.
• Check that there is nothing preventing the brush and support from
turning. To do so, remove the tracks and manually rotate the wheels to
check that there are no external elements jammed in a housing.
• Cleaner operating outside the pool. Make sure you start the cleaner
when it is in the water (see § "3.3 Immersing the cleaner").
• Check that there are no stones or hair in the propeller (see § "4.3 I
Cleaning the propeller").
• Clean or change the filter if necessary.
• Temperature too high in the control box:
- Preferably install the box in a shaded location.
- Allow the box to cool before starting a new cycle.
• General cleaner surge current. Check the solutions for flashing indicators
No. 2 and No. 3.
• The cleaner may be stuck in one area of the pool. Re-start a cycle or
check the solutions for the flashing indicator No. 2.
Solutions