Phone Firmware And Upgrades - Cisco 8832 Manual

Your Phone
Figure 13: Wireless Microphone
Figure 14: Wireless Microphone Mounted on the Charging Cradle
When the conference phone is in a call, the expansion microphone LED around the Mute
green.
When the microphone is muted, the LED is lit red. When you press the Mute button, the phone and the
expansion microphones are muted.
If the phone is paired with a wireless microphone (for example, Wireless microphone 1) and you connect the
wireless microphone to a charger, pressing the Show detail softkey indicates the charge level for that
microphone.
When the phone is paired with a wireless microphone and you connect a wired microphone, the wireless
microphone gets unpaired and the phone is paired with the wired microphone. A notification appears on the
phone screen indicating that the wired microphone is connected.
Related Topics

Phone Firmware and Upgrades

Your phone comes pre-installed with firmware that is specific to the call control system.
Install the Wireless Expansion
Pair a Wireless Microphone, on page 9
Unpair a Wireless Microphone, on page 10
Install the Wireless Microphone Charging
Charge a Wireless Microphone, on page 11
Microphones, on page 9
Cradle, on page 10
Phone Firmware and Upgrades
button is lit
Your Phone
21