Cisco Ip Conference Phone 8832 Buttons And Hardware - Cisco 8832 Manual

Cisco IP Conference Phone 8832 Buttons and Hardware

Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the phone prompts you to enter any
required authorization code, billing code, or additional digits manually.
Example
To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code
and billing code, consider the following requirements:
• You need to dial 9 for an outside line.
• You want to call 5556543.
• You need to input the authorization code 1234.
• You need to input the billing code 9876.
• You must wait for 4 seconds.
• After the call connects, you must dial the extension 56789#.
In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.
Related Topics
Cisco IP Conference Phone 8832 Buttons and Hardware
The following figure shows the Cisco IP Conference Phone 8832.
Your Phone
16
Calls That Require a Billing Code or Authorization Code
Phone Keypad Characters, on page 19
Your Phone