Cisco 8832 Manual page 5

Your Phone
• Wireless connection—The Cisco IP Conference Phone 8832 can connect to a Wireless Access Point
using Wi-Fi.
Mobile and Remote Access Through Expressway—If your administrator sets up Mobile and Remote Access
Through Expressway and you connect your phone to the network, it connects to the Expressway server.
Figure 2: PoE Deployment Options
The following figure shows the two PoE deployment options. You can use the option that is shown in the
right-side illustration only if you are based in North America.
Cisco IP Conference Phone 8832 PoE Injector
with the PoE power option
Figure 3: Non-PoE Deployment Options
The following figure shows the two Non-PoE deployment options. You can use the option that is shown in
the right side illustration only if you are based in North America.
• PoE deployment: Connect the phone to the Cisco IP Conference Phone 8832 PoE Injector and
connect the injector to the network with an Ethernet cable.
• Non-PoE deployment: Depending on your location, use one of the following options:
• Connect the phone to the Cisco IP Conference Phone 8832 Non-PoE Ethernet Injector.
Then, connect the injector to the network with an Ethernet cable and to an electric outlet with
a power adapter.
• Connect the phone to the Cisco IP Conference Phone 8832 Ethernet Injector. Then, connect
the injector to the network with an Ethernet cable and to an electric outlet with a power adapter.
You can use this option only if you are based in North America.
Cisco IP Conference Phone 8832 Ethernet Injector with
the PoE power option
Connect to the Network
Your Phone
5