SMC Networks LSP Series Operation Manual
Liquid dispense pump solenoid type
Hide thumbs
Also See for LSP Series:
- Manual (7 pages) ,
- Quick start manual (12 pages) ,
- Operation manual (15 pages)
Related Manuals for SMC Networks LSP Series
Summary of Contents for SMC Networks LSP Series
- Page 1 Doc. no.LV10***-OMS0002-A PRODUCT NAME Liquid Dispense Pump (solenoid type) MODEL / Series / Product Number Series LSP...
- Page 2 Contents １．Index ２．Feature, Application Example ３．How To Order ４．Specifications ５．Construction ６．Dimensions ７．Specific Product Precautions 1 ８．Specific Product Precautions 2 ９．Specific Product Precautions 3 １０．Safety Instructions １１．Countermeasures 10-12...
- Page 12 ■ ■ ■ ■ Countermeasures If any abnormality is found, perform checks according to the following list. If the abnormality cannot be eliminated, contact your SMC representative. Warning Discharge fluids from the pump. Eliminate the residual fluids, and thoroughly clean the product with pure water or air. Do not disassemble the product.
- Page 13 Problem Possible causes Countermeasures - Dispense volume adjusting screw incorrectly set. - Adjust dispense volume screw until correct dispense obtained. - Excessive fluid viscosity. - Use fluid of the recommended viscosity. - Operating frequency is too high. - The frequency should be set at or below the maximum operating frequency. - Piping diameter is too small.
- Page 14 Problem Possible causes Countermeasures - Intrusion of air from the suction (IN) side. . - Check the piping on the suction (IN) side. 5) Leakage of fluids from pump connections. - Sealing failure on the suction (IN) side or dispense (OUT) side. - Check sealing of the piping.
-
Page 15: Revision History
Revision history Tube connection type added Precautions change 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021 JAPAN Tel: + 81 3 5207 8249 Fax: +81 3 5298 5362 http://www.smcworld.com Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. ©...
Need help?
Do you have a question about the LSP Series and is the answer not in the manual?
Questions and answers