Uninstall Driver Before Installing Update - Multitech MultiConnect microCell MTCM2-L6G1 User Manual

INSTALLING DRIVERS
b. Select a directory.
c. Click OK.
8. Click Install.
Depending your Windows version, you see a Windows Security window. Check Always trust software
from Sequans Communications and then click Install.
9. Click Finish.

Uninstall driver before installing update

Note: If you previously installed USB drivers for this device, uninstall them before installing or re-installing this
driver. Uninstall all existing drivers for this device. Refer to
Windows 10
To uninstall drivers from Windows 10:
1. Open the Start Menu and click Settings.
2. Click System.
3. Click Apps & Features.
4. In the Apps & Features pane, scroll down to Sequans 4G solution ## , where ## is the version number,
and click Uninstall. Confirm that you want to uninstall the driver.
Windows 8 or 8.1
To uninstall drivers from Windows 8 or 8.1:
1. Open Windows Programs and Features.
2. Scroll to Sequans 4G solution ##, where ## the version number, and click Uninstall. Confirm that you
want to uninstall the driver.
Windows 7
To uninstall drivers from Windows 7:
1. Open Programs and Features from the Windows Control Panel.
2. Scroll to Sequans 4G solution ##, where ## the version number, and click Uninstall. Confirm that you
want to uninstall the driver.
14
Uninstall Windows Drivers
®
MultiConnect microCell MTCM2-L6G1 User Guide
for details.