Riello RIELLOtech PRIME Installation, Operation And Maintenance Manual page 9

RIELLOtech PRIME control panels can be installed either on the top of the boiler or on one of its side panels. Before
commencing installation, check the arrangement of the holes on the top panel or side panel of the boiler.
SIDE panels
Pannellatura LATERALE
Lato SUPERIORE della CALDAIA TOP of boiler
TOP panels
Pannellatura SUPERIORE
FRONT of boiler
Lato FRONTALE della CALDAIA
Once you have identified the right holes for the type of installation required, proceed as follows:
- Push out the pre-formed slots on the boiler casing corresponding to the oval cable grommets in the control panel
- Perforate the membranes of the control panel cable grommets. Pull out the thermostat cable and route it through the
slot in the top panel
- Secure the control panel to the boiler casing.
2 0 8
2 1 8
1 7 0
Lato SUPERIORE della CALDAIA TOP of boiler
FRONT of boiler
Lato FRONTALE della CALDAIA
ASSEMBLY
9