General Safety Information; Precautions - Riello RIELLOtech PRIME Installation, Operation And Maintenance Manual

b
Check that the product is complete and undamaged as
soon as you remove it from its packaging. Contact the
reseller from whom you purchased the product if you noti-
ce any problems.
b
This product must be installed by a legally qualified hea-
ting engineer. (In Italy heating engineers are regulated by
law 37 of the 22/01/2008.) On completion of the installa-
tion, the installer must issue the owner with a declaration
of conformity confirming that the installation has been
completed to the highest standards in compliance with the
instructions provided by RIELLO in this instruction manual,
and that it conforms to all applicable laws and standards.
b
This control panel is designed and made for use with boi-
lers generating hot water up to 110°C, and must be used
exclusively for this purpose and within its specified perfor-
mance limits.
The operation of any appliance that uses electrical power demands that a number of fundamental safety precautions
be respected. In particular:
a
Always turn the electrical power supply OFF at the main
switch before commencing any cleaning or maintenance.
a
Do not tamper with or adjust the safety or control devices
without prior authorisation and instructions from the boi-
ler's manufacturer.
a
Never pull, disconnect, or twist the electrical cables
coming from the appliance even if it is disconnected from
the mains electricity supply.
a
Dispose of packaging materials in compliance with appli-
cable standards and legislation governing the disposal of
urban, domestic and industrial waste.

GENERAL SAFETY INFORMATION

b
The manufacturer declines all responsibility, contractual
or other, for damage to property or injury to persons or
animals caused by improper installation, adjustment,
maintenance or use.
b
This instruction manual is an integral part of the product.
It must be kept safe and must ALWAYS accompany the
product, even if it is sold to another owner or transferred
to another user or to another installation.
If you damage or lose this manual, order a replacement
immediately from your local Technical Assistance Centre.
a
Never switch the control panel on even for a short period
if the safety devices are not functioning correctly or have
been tampered with.
a
All maintenance and repairs must be carried out by a
legally qualified heating engineer.
a
Do not use water to extinguish fire in the control panel.
Switch power OFF at the mains power switch to isolate
the control panel electrically first. Then use a class E fire
extinguisher (marked "SUITABLE FOR LIVE ELECTRICAL
ITEMS") to extinguish the flames.

PRECAUTIONS

5