Page 2
Thank you for choosing a R product, an innovative and high quality appliance that guar- antees wellbeing for a long time. This manual contains information we deem necessary for correct and easy use. Thanks again. RIELLO COMPLIANCE The appliances R sono conformi with European Directives: — Low Voltage Directive 2014/35/EU —...
GENERAl INfoRmAtIoN GENERAL INFORMATION Any repair and maintenance inter- General Notices ventions must be carried out by R Technical Support Service, in accordance with the provisions contained in this publication. Do not modify or tamper When you get the product, check imme- with the unit as dangerous situations diately that the contents are all present may arise and the unit manufacturer will...
GENERAl INfoRmAtIoN Energy saving tips — for heating: 20-24 °C Unit description Cover the windows with a shutter or a curtain to block the entrance of sunlight, Control, setting and programming opera- increasing the cooling effect. tions are carried out with the control panel. The electronics modulates the device opera- Maintaining the temperature setting at a tion according to the temperatures detected...
Page 6
GENERAl INfoRmAtIoN operating mode Smart mode enabled Cooling mode enabled Heating mode enabled Ventilation mode enabled Dehumidification mode enabled functions Access to the following functions is performed sequentially by pressing the key and work Vertical air deflector activated Horizontal air deflector activated Sleep function enabled Heat Reclaim Ventilation function enabled Not available...
Page 7
GENERAl INfoRmAtIoN other icons Display current time Alarm display Timer setting value Switch on timer enabled Switch off timer enabled Cassette deflectors function enabled Detected ambient temperature Value of the desired temperature when pressing the increase and decrease keys Parental lock function activated Lock function activated Centralized control enabled Not available...
The document envelope must be kept in a safe place. Any duplicate must be Storage requested from Riello S.p.A. which re- serves to charge the cost. The product must be stored of according Dimensions and weight to the regulations in force.
INStAllAtIoN Check that: — installation on a perimeter wall — walls crossed by cold or hot piping — the position is about 1.5 m off the ground — installation near doors or windows, cooking equipment, radiators, fan coils — installed taking into consideration the or generally in conditions that might maximum length of the connecting alter the measured temperatures...
Cable length length diameter mm² x n Indoor unit 0,3 x 3 Wired Touch panel 0,5 x 3 0,75 x 3 1,25 x 3 The connection is polarised, respect the 2 x 3 correct sequence. mandatory items: The connection is polarised, respect the —...
down, the value changes faster. Initial settings — confirm with Abort: — wait 10 seconds The control panel was designed to ensure Alternatively: user-friendliness even with no special pro- gramming. — press to cancel and turn off the To activate, just power on and set current control panel time.
Required ambient temperature available • Activation range is between 16 °C and 30 °C. — press in sequence until the Activation appears — press in sequence until the appears The equipment will operate at selected ventilation speed. Set required temperature as follows: —...
• Set required time as follows: — press to select hours or minutes — work on Each time the key is pressed, the values changes by 1. by keeping the key pressed down, the value changes faster. — confirm with •...
ming have disappeared — press to confirm Automatic start and stop (combined icon stay fixed. function) • If the exit angle can be set: Timer functions can also be activated in — press to enter the function cycle combination. Two configurations are avail- —...
Set required deflector position as follows: • Activation — press to enter the function cycle • Activation — press to enter the function cycle — work on until the intermittent appears — work on until the intermittent appears Control panel display shows with —...
• Switch-off mote control buttons. — press to enter the function cycle • button locking — work on until the intermittent — press simultaneously for 5 appears seconds — press to confirm Remote control display shows icon disappears. • button unlocking Energy Saving function efficiency is high- —...
Page 17
mode — press for 15 seconds It switches the temperature scale from Fahrenheit to Celsius: — set temperature 30° in each operating mode — press for 15 seconds...
Page 18
RECyClING AND DISPoSAl DISPOSAL Packing materials must be disposed of sepa- rately, in order to be recovered and recycled. Equipment at end of life and flat batteries must be disposed of as required by prevail- ing law and regulations.
Page 20
RIELLO S.p.A. - 37045 Legnago (VR) tel. +39 0442 630111 - fax +39 0442 630371 www.riello.it As the manufacturer is constantly improving its products, the aesthetic or dimen- sional features, the technical data, the equipment and accessories indicated could be subject to variations.
Need help?
Do you have a question about the Wired Touch panel and is the answer not in the manual?
Questions and answers