Download Print this page

Hyundai HPS-300 User Manual page 9

Portable power station
Hide thumbs Also See for HPS-300:

Advertisement

HYUNDAI
2) Charging power station
a. Charging with AC cable (Max charging power : 60W)
Plug the charging cable into wall outlet, then connect the other side to the AC input port (20) of the
portable power station, you can see the charging state from the LCD display (2).
b. Charging with solar panel (Max charging power : 30W) * Solar panel is optional
- Place your solar panel where it can get as much direct sunlight as possible.
- Connect the solar charger by solar charging cable, then insert the plug of the cable into the solar
charging port (22) on the back side of the portable power station. You can know the charging state
from the LCD display (3).
- It will stop charging when the battery is full of energy.
NOTE:
1. For wall charging, recharge only with the charger specified by the manufacturer.
2. For solar charging, it is recommended to use HYUNDAI solar charger or unless must use solar charger
as following specification.
- DC output : 5~24V
- Charging type : PMW
- Connector : DC male connector
Charge from Wall outlet
Solar Panel
07

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Hps-600Hps-1100Hps-1600