Subscribe to Our Youtube Channel
Related Manuals for Ballard Designs Banyan Bone Inlay Bed
Summary of Contents for Ballard Designs Banyan Bone Inlay Bed
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Banyan Bone Inlay Bed ITEM NUMBER: MB491 DIMENSIONS OF ITEM ASSEMBLED: 68”H x 65”W x 88”L PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE. UPDATED: 1/30/2019 Page 1 of 5...
-
Page 2: Required Tools
Ltr. Qty. Hardware Included REQUIRED TOOLS: Phillips Screwdriver Two person assembly suggested. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until assembly is complete. Components NOTE: Two Cartons. Headboard packaged separately from all other components. Customer Service: 800-367-2810 Page 2 of 5 Online: www.ballarddesigns.com... - Page 3 STEP 1: Insert Leg (H) into bottom of Footboard (G). Turn clockwise and firmly tighten. STEP 2: Connect Side Rail (E) and (F) to Headboard (D) by sliding in hooks and firmly pushing down to lock. Customer Service: 800-367-2810 Page 3 of 5 Online: www.ballarddesigns.com...
- Page 4 STEP 3: Connect Side Rail (E) and (F) to Footboard (G) by sliding in hooks and firmly pushing down to lock. STEP 4: Attach Support Leg (I) to the middle of Support Rail (G) using Bolt (A). Firmly tighten using Allen Key (C). Customer Service: 800-367-2810 Page 4 of 5 Online: www.ballarddesigns.com...
- Page 5 STEP 5: Attach each Support Rail (G) to Side Rails (E, F) using Screw (B). Firmly tighten using a screwdriver. Screwdriver (not included) Cleaning & Care: DO NOT use alcohol based products or spray polisher as they can damage the finish. Dust with a soft cloth.
Need help?
Do you have a question about the Banyan Bone Inlay Bed and is the answer not in the manual?
Questions and answers