Table of Contents
Advertisement
Fence Information Fence Size (L x W x H)
Miter Gauge
Information
Other Information
INTENDED USE
Table saw and the workpiece guide equipment supplied with it are intended to be used
exclusively for the following purposes:
• Laminated and unlaminated board materials (e.g. chipboard, coreboard, MDF board, ...)
• Solid wood
• Gypsum plasterboard, Cardboard, Veneer with a suitable clamping device.
• Dimensionally stable plastics (thermoset plastics, thermoplastics). Sawing these materials
does not normally involve any risks in respect of dust, chips, and thermal degradation
products.
Tools:
The chosen saw blade must be suitable both for the specific work cycle and for the specific
material.
• Only circular blades which are solid chrome vanadium (CV) or tungsten carbide tipped (TCT)
and have a diameter of 10" (255mm), arbor size 5/8" (16mm), as well as a maximum width of
13/16" (20mm) are allowed for the main saw.
• Saw blades made of high-alloy high-speed steel (HSS) are not allowed to be used.
• Saw blades and their fixing devices shall conform to EN 847-1:2005.
Front of Table to Blade, Maximum Cut
Miter Gauge Slot Type
Miter Gauge Slot Type (W x H)
Dust Port Size
12.25" (311mm)
34.25" x 2.9375" x .59"
(870 x 75 x 15mm)
T-Slot
.75" x .375" (19 x 9.5mm)
4" (102mm)
12
12
Advertisement
Table of Contents
