System Log - Tenda AC15 User Manual

Method Two: Press and hold the RST button on the top panel for about 8 seconds and then release
it to reset the Router to factory default settings.
Note
1. During the restoration, do not disconnect the power of the Router and other relevant devices.
2. After you restore the Router to factory default, you need to reconfigure the Router for accessing
the Internet.
3. Strongly recommend you not to restore the Router, unless the following sequence appears:
 You have to access the Router but you cannot remember the login name and password.
 Your Router does not work well, and you want to reconfigure it by following the Setup Wizard.
 You cannot access the Internet, and Tenda technical support recommends you to restore to factory
default.

System Log

If you want to have a good knowledge of system operation, or when you have difficulties in surfing
the Internet, you need to send your system logs to Tenda technical supporters.
Log in to the Router's User Interface, and click Administration > System Log.
118