Solid
Blinking
5GHz
Off
Solid
Blinking
WPS
Off
Solid
Blinking
USB
Off
Blinking
SYS
Off
3 Buttons & Interfaces
WPS: Press and hold it for about half a second and then release it to enable the WPS feature.
Within 2 minutes, enable the wireless device's WPS feature to establish WPS connection.
WiFi: Press and then release it to enable/disable WiFi feature.
3
5GHz WiFi is enabled.
The Router is sending or receiving 5GHz WiFi data.
5GHz WiFi is disabled.
WPS is enabled.
The Router is performing WPS negotiation to a client device, or transmitting
data.
WPS is disabled.
A USB device is well-connected, and ready.
A USB device is plugged in, and is transmitting data.
No USB device is detected, or USB device is ejected safely.
The system is working fine.
The system is malfunctioning.