Rotating The Monitor - BenQ AQCOLOR DesignVue PD Series User Manual

Rotating the monitor

1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
Click to launch the
support on page 3), and check
automatically.
Alternatively, right-click the desktop and select
in
Portrait Orientation
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as
illustrated.
Display Pilot Software
Auto Pivot
, and apply the setting.
(downloaded from www.BenQ.com, see
to set the display to rotate with the monitor
Screen resolution
from the popup menu. Select
How to assemble your monitor hardware
Product
90
19